Products

WM: Wire mesh

The WM series filter elements are designed for critical filtrations. Made entirely of stainless steel to withstand intensive chemical or mechanical regeneration cycles. Crimping or welding assembly enable the use of WM series elements at very high temperature. Resin bonded configurations provide a cost effective alternative for non-critical applications.

WL: High-flow wire mesh

The WL series filter elements are designed for critical filtrations. Made entirely of stainless steel to withstand intensive chemical or mechanical regeneration cycles. Available in different length with diameter up to 120 mm, can handle high flow-rate and consequently reduce the housing dimension.

The SM series filter cartridges are fabricated using multi layered wire mesh sintered as plates then rolled and welded. Sinterizing five different wire mesh layers provide a self-supported filter element without the need of perforated inner core. The SM series cartridges are the ideal solution for liquid or gas critical applications.

SP: Sintered powder

The SP series filter cartridges are fabricated using selected metallic powders sintered as plates then rolled and welded, or manufactured directly as seamless tubes. The SP series cartridges are the ideal solution for onsite backwash in liquid applications.

SF: Sintered fibres

The SF series cartridges are manufactured with sintered metal micro-fibers, uniformly distributed to create a 3D filtering structure. In order to offer a superior mechanical strength and a better drainability, the filter media is fabricated using an additional sintering process with one or two wire meshes. The SF series cartridges are specifically designed for viscous or corrosive fluids.

SFH: High-flow sintered fibre

The SFH series cartridges are manufactured with sintered metal micro-fibers, uniformly distributed to create a 3D filtering structure. Available with different length and diameter up to 267 mm allow handling high flow-rate and consequently reducing the filter housing dimension. The SFH series cartridges are assembled by welding and are the ideal solution for high flow-rate of gas or liquids.

WMH: High-flow pleated wire mesh

The WL series filter elements are designed for critical filtrations. Made entirely of stainless steel to withstand intensive chemical or mechanical regeneration cycles. Available with different length and diameter up to 267 mm allow handling high flow-rate and consequently reducing the filter housing dimension. The WMH series cartridges are assembled by welding and are the ideal solution for high flow-rate of gas or liquids.