Louver Dampers
Features
-
Multiple linkage and sealing arrangements for both flow control and isolation (<99.5%)
-
Flex-Ledge seal offers tight shut off with low pressure drop, and can operate in high dust load applications.
-
Many different actuator options to fit customer’s operating requirements.
Applications
-
Applications where 100% isolation is not required.
-
Applications where flow modulation is required (fans, etc.)
Operating Range
-
0-5 psig depending on size
-
-100 to 1400°F
-
Sizes from 12” > 40’
-
Horizontal or vertical
Material
-
Carbon Steel
-
Stainless Steel
-
Nickel Alloys
Louver Damper Fit:
-
Attached or linked to piping/duct flanges or directly to duct.
-
Flange connections may be alignment bolted and seal welded into the duct, or provided with bolt and gasket type connections.
-
Louver dampers typically require between 8”-24” of duct space for installation.
Louver Damper Form:
-
Single louvers are used for duct isolation and flow control.
Louver Damper Function:
-
Open/close applications where less than 99.5% isolation is acceptable
-
Flow control/modulation
