MARKETS
PipeX MFL - galvanized / MFL - stainless steel
In combination with a seal that covers the annular space, a suitable pressure-tight sealing is guaranteed between the wall sleeve and the carrier pipe.
Fields of application
For pipe and cable penetration in accordance with DIN 18533; for buildings with sealing sheets (black tube); wall sleeve with fixed / loose flange for installation in the concrete formwork
Material
galvanized steel; stainless steel V2A (1.4301) V4A (1.4571)
Properties
Anchoring via concrete anchors or cap nuts; version available for retrofitting installation by means of dowels; against pressing and non-pressing water
Sizes
From ND 80 to ND 1000 (sleeve diameter)
For pipe and cable penetration in accordance with DIN 18533; for buildings with sealing sheets (black tube); wall sleeve with fixed / loose flange for installation in the concrete formwork
Material
galvanized steel; stainless steel V2A (1.4301) V4A (1.4571)
Properties
Anchoring via concrete anchors or cap nuts; version available for retrofitting installation by means of dowels; against pressing and non-pressing water
Sizes
From ND 80 to ND 1000 (sleeve diameter)
SIMILAR PRODUCTS
