CleanpaX Flex-G2 – Flexible Pig

Fields of application
Calibration, location and removal of objects.

Gauging pigs are used to check if weld seams do not have any excessive weld penetration. Gauging pigs are also used to localize and remove objects which could prevent pigs from passing through.

Guide bars in the opening are recommended for T-pieces when their branch opening is 75% of the pipe ID.

Available spare parts:
Standard cup, body-shaft, diabolo spacers, ring spacer, socket head bolt, self-locking nuts, steel security ring, gauging plate

Material
Mounted on a very flexible pig body, these pigs are optionally available with two (Flex-G2) or three (Flex-G3) replaceble polyurethane cups and a gauging plate. The diameter of the gauging plate is normally 90% or 95% of the pipe ID. When ordering - please specify the exact diameter of the gauging plate.
The cups are also available in EPDM, NBR or CR Neoprene on request.

Properties
This type of pig easily passes 2.5 D bends; gravity: -; shore A hardness: 75;
temperature °C: -20 - +80; running speed m/s: 2-5;
service life: approx. 240 km (practical value); ø reduction rate max: 15%;
min. radius bends: 2.5 D; fitting reduction

• Filling
• Emptying
• Separation