MARKETS
LINK-SEAL especially for plastic pipes
The radial expansion of the rubber parts ensures a permanent, pressure-tight and secure sealing of the annular space. For particularly thin-walled plastic pipes such as pre-insulated, flexible casing and corrugated pipe systems, a Compakt Temp or Compakt Super Soft is recommended.
Fields of application
Particularly soft rubber, especially suitable for plastic pipes. Use in normal atmosphere, water or humidity. Suitable for electrical isolation and cathodic corrosion protection.
S 316: Resistant to water and against most inorganic (acids and alkalis) and organic substances.
Material
EPDM-Rubber; bolts: BC galvanized / BS 316 A 4-70 stainless steel;
Shore A 40° ±5; pressure plates glass ber reinforced polyamide
Properties
Temperature range -40 °C to 80 °C; pressure tight up to 3 bar;
electrical isolation with a dialectric strength of 500 V/mm
Sizes
LS 200 to LS 700
LINK-SEAL® BC - galvanized
LINK-SEAL® BS 316 - stainless steel
ADDITIONAL INFO
- Easy and quick installation due to pre-assembled modules
- Different versions available for potable water, oil, fuel, solvents and high temperature resistance
- High quality rubber parts ensure long lifetime
- Protected position in the masonry
- Suitable for retrofitting
- Choice of galvanized 8.8 or stainless steel bolts A4-70
- Color differentiation of the various rubber qualities
- Electrically isolating
- Hydrostatic sealing against pressing water
SIMILAR PRODUCTS
