MARKETS
Supertop upe cond/LL
Conductive hose to convey chemicals and petroleum products, with PE-UHMW tube. Approved for use in ATEX areas.
Specifications
EN 12115:11, tested acc. EN 13463-1 / EN 60079-0.
EN 12115:11, tested acc. EN 13463-1 / EN 60079-0.
Application
hardwall smooth hose to convey a wide range of aggressive chemicals, solvents, petroleum products and oils. Hose tested and approved by INERIS for use in ATEX areas. Normally installed on tank trucks and discharge platforms in chemical and oil industries.
hardwall smooth hose to convey a wide range of aggressive chemicals, solvents, petroleum products and oils. Hose tested and approved by INERIS for use in ATEX areas. Normally installed on tank trucks and discharge platforms in chemical and oil industries.
Temperature: -40°C(-40°F) +100°C(+212°F) depending on medium.
Branding: blue/white stripe “IVG Chem Supertop-upe cond/LL...”. Embossed branding according to EN 12115.
Electrical resistance
Ω/T, electrically conductive hose R≤1x106Ω/lgth. Electrical resistance guaranteed for lengths equal or lower than 40m. The hose can be used in ATEX areas.
Tube: black, smooth, high weight polyethylene (PE-UHMW). Chemical resistance according to IVG chemical resistance chart. For temperature exceeding 50°C contact IVG.
Reinforcement: high strength synthetic cord and steel helix wire.
Cover: black, smooth (wrapped finish), EPDM rubber, resistant to chemicals, abrasion, weathering and ozone..
SIMILAR PRODUCTS
