MARKETS
ProteX Core Hole Sealing
The resin can be used at ambient temperature of 5 °C upwards. The surface to be coated must be cleaned and carefully dried by preheating the surface, smooth surfaces need to be roughened beforehand with emery cloth grain size 60 or coarser, the abrasive dust is to be removed afterwards. The hardener is added to the can with the liquid plastic and stirred well. The layer thickness is approx. 0.25 mm per coat, up to three coats can be applied if required.
Fields of application
Container of primer and container of special paint
Properties
Content: 0.33 liter, sufficient for approx. 1.5 sqm
- Priming of core-drillings and sealing with special paint
- Especially for sealing the concrete of a core hole
- The coating is suitable for indoor and outdoor use as a non-porous protective coating for concrete, fiber cement, masonry, steel, wood and other materials
Container of primer and container of special paint
Properties
- Primer color:
- Color: colorless
- Drying at 20 °C: overcoatable after approx. 1 hour
- Color: pebble grey
- Drying at 20 °C: Seal can be installed after approx. 12 hours continuous operating temperature: max. -10 °C to max. 50 °C
- Short drying time
- Two-component epoxy resin
- Fully-hardened, white protective coating has a smooth, viscoelastic surface and is insensitive to shocks and impacts
- The treated surface has a very good resistance to alkalis and acids and is seawater proof
Content: 0.33 liter, sufficient for approx. 1.5 sqm
SIMILAR PRODUCTS
