Connection cable for EKX-FIBC (external measuring module)

The cables can be used as a connection between the main housing and one external measuring module (Variant 1) or as a connection between two external measuring modules (Variant 2).

• Variant 1 consists of a cable with a quick coupling on the one and a plug for the circuit board of the main housing on the other side. The cable length is either 10 m or 20 m.
• Variant 2 consists of a cable with two quick couplings, one on each side for connection of two external measuring modules. The cable length is 10 m.

Please note: The total cable length must not exceed 20 m. It is therefore not possible to combine variant 1 with 20 m and variant 2 with 10 m.