MARKETS
Protal Systems
Protal 7000 Airless Spray
High Performance Epoxy Coating
Solvent free two-pack high build high performance epoxy coating which is applied with conventional airless spray equipment.
Protal 7000X
A Lower cost alternative
Protal 7000X is an extremely durable glass flake reinforced ployester coating that can easily be applied in one coat by airless spray method, at a minimum thickness of 1mm in normal ambient temperature conditions. This heavy duty coating also cures very quickly to form a very tough cost--effective solution for long-term protection.
Protal 7125
Fast cure, low temperature pipeline coating - winter grade
A low temperature coating that can cure at -4°F (-20°C). The coating can be backfilled in 30 minutes at 50°F (10°C). Used for girth welds, tie-ins, rehabilitation, repairs to FBE and sacrificial coating to FBE.
Protal 7200
High build, fast cure pipeline coating
A fast cure, one coat epoxy coating that can be hand or spray applied to girth welds, tie-ins, fittings and rehabilitation of existing pipelines. Exhibits excellent cathodic disbondment properties at 175°F (80°C) with 7 mm disbondment.
Protal 7900
High temperature pipeline coating
A high build epoxy coating that can be hand applied to girth welds, tie-ins, fittings and rehabilitation of existing pipelines. Maximum operating temperature up to 250°F (121°C).
Protal 7300
High Performance Epoxy Coating
Solvent free two-pack high build high performance epoxy coating which is applied with conventional airless spray equipment.
Protal 7000X
A Lower cost alternative
Protal 7000X is an extremely durable glass flake reinforced ployester coating that can easily be applied in one coat by airless spray method, at a minimum thickness of 1mm in normal ambient temperature conditions. This heavy duty coating also cures very quickly to form a very tough cost--effective solution for long-term protection.
Protal 7125
Fast cure, low temperature pipeline coating - winter grade
A low temperature coating that can cure at -4°F (-20°C). The coating can be backfilled in 30 minutes at 50°F (10°C). Used for girth welds, tie-ins, rehabilitation, repairs to FBE and sacrificial coating to FBE.
Protal 7200
High build, fast cure pipeline coating
A fast cure, one coat epoxy coating that can be hand or spray applied to girth welds, tie-ins, fittings and rehabilitation of existing pipelines. Exhibits excellent cathodic disbondment properties at 175°F (80°C) with 7 mm disbondment.
Protal 7900
High temperature pipeline coating
A high build epoxy coating that can be hand applied to girth welds, tie-ins, fittings and rehabilitation of existing pipelines. Maximum operating temperature up to 250°F (121°C).
Protal 7300
Moisture Tolerant Pipeline Liquid Coating for wet surfaces
A VOC free, 100% solids epoxy coating specially formulated to coat the dry damp or wet exterior surfaces of pipelines, structures or other steel surfaces as a result of of the environment or atmospheric condensation.
A VOC free, 100% solids epoxy coating specially formulated to coat the dry damp or wet exterior surfaces of pipelines, structures or other steel surfaces as a result of of the environment or atmospheric condensation.
Protal 7300 can be applied by pad, brush or roller in one coat.
Protal Repair Kits
Repair kits are also available for the range of Protal Epoxy coatings. Please contact us for further information.
ADDITIONAL INFO
- High build achieved in only one coating operation
- Very fast curing liquid applied coatings
- Designed for the external protection of all line-pipe, fittings, specials and storage vessels
- Standard high quality abrasive blast cleaning surface preparation
- Can be applied by either brush, roller or spray methods
- Fully backed by a team of qualified professionals who provide technical advice and on-site guidance
