MARKETS
180/120 Degree
Kinetrol's 180-degree pneumatic actuators are simple and compact, with no external moving parts. Their design is outstanding, providing a constant output torque, thanks to a continuous gear-up ratio, throughout the actuators' travel. Available either as double acting or spring return.
Materials of Construction
Casing:
Models 0M0, 01, & 02 - Pressure die cast ZL16 zinc alloy.
Models 03, 05, 07, 08, 09, 10, 12, 14, 15, 16, 18, 21, 30, 40 & 60 - Die cast or sand cast aluminium alloy.
Vane & Output Shaft:
Models 0M0, 01, 02, 03 and 05 - Stainless steel.
Models 07 to 60 - SG iron, zinc plated.
Shaft bushes: PTFE coated bronze (lead free).
Seals: Moulded polyurethane.
High and low temperature seals also available - contact Kinetrol.
Seal expanders: Stainless spring steel.
Couplings: Weldable mild steel, zinc plated.
Working Temperature Range
Standard: -40°C to +80°C (-40°F to +176°F).
High temperature option: -20°C to +100°C (-4°F to +212°F) using temperature seals
for higher temperatures with special equipment - contact Kinetrol.
If consulted Kinetrol may, under certain circumstances/conditions, be prepared to extend its
high temperature limits
Low temperature option: -54°C to +60°C (-65°F to +140°F) using temperature seals
include option “W” at end of actuator coding.
Maximum Pressure
Maximum recommended working pressure: 7 bar / 100 psi
Maximum overload pressure: 10 bar / 150 psi
Casing:
Models 0M0, 01, & 02 - Pressure die cast ZL16 zinc alloy.
Models 03, 05, 07, 08, 09, 10, 12, 14, 15, 16, 18, 21, 30, 40 & 60 - Die cast or sand cast aluminium alloy.
Vane & Output Shaft:
Models 0M0, 01, 02, 03 and 05 - Stainless steel.
Models 07 to 60 - SG iron, zinc plated.
Shaft bushes: PTFE coated bronze (lead free).
Seals: Moulded polyurethane.
High and low temperature seals also available - contact Kinetrol.
Seal expanders: Stainless spring steel.
Couplings: Weldable mild steel, zinc plated.
Working Temperature Range
Standard: -40°C to +80°C (-40°F to +176°F).
High temperature option: -20°C to +100°C (-4°F to +212°F) using temperature seals
for higher temperatures with special equipment - contact Kinetrol.
If consulted Kinetrol may, under certain circumstances/conditions, be prepared to extend its
high temperature limits
Low temperature option: -54°C to +60°C (-65°F to +140°F) using temperature seals
include option “W” at end of actuator coding.
Maximum Pressure
Maximum recommended working pressure: 7 bar / 100 psi
Maximum overload pressure: 10 bar / 150 psi
